S220, S240, S260, and CUP 255 owners: Let the Fastworks Torque ECU reflash take your Exige to nearly 280 flywheel horsepower...that's an additional 25whp/10tq (almost 20tq at 7,300 ) with NO additional hardware required! Also - check out the torque & power gain over 7,000 RPM...and no typical power drop between 7,000 and 7,750. You'll also notice a good gain below 4,500 rpm which is very helpful if you use your car as a daily street driver.

Commonly, to get this much of a dramatic increase in power/torque the fuel is leaned out...not with our tunes. The Fastworks Torque Tune significantly increases safety fuel margins via a richer flow (see dyno)